Product Catalogue

Home / Product Catalogue

HM-1B Bridge Plug

pennoiltools

Description

The HM-1B Bridge Plug, HM-1B Hydraulic-Mechanical Setting Tool combo allows fluid flow from both directions before setting. Pinnacle’s HM-1B Bridge Plug is a permanent, drillable cast iron bridge plug set with hydraulic pressure and mechanical force to isolate the lower part of a wellbore. Available in 34.5 mPa (5000psi) and 69 mPa (10,000 psi) models up to 177.80 mm (7”) O.D. The HM-1B Bridge Plug comes with durable one piece cast iron slips, one piece element and anti extrusion rings. The plug uses an HM-1B Hydraulic-Mechanical Setting Tool to set it.

Features

• The compact design enables use in deviated wells.
• One piece slips and pinned body parts minimize the risk of premature setting.
• Hydraulic pressure combined with mechanical pull to set.
• Body parts keyed for milling/drilling out.
• Construction with drillable materials enables the plug to be milled or drilled out to save the time and expense of retrieval.
• Can be cost effective when compared to wireline costs.
• Higher temperature rated element available on request.
• Available in 34.5 mPa and 69 mPa (5,000 psi and 10,000 psi) models up to 219.08 mm (8 5/8”) O.D.
• Standard packing element rated at 1500C (3000F).

HM-1B-Hydraulic-Mechanical-Setting-Tool_HM-1B-Bridge-Plug-tech-data

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search

error: Content is protected !!