Product Catalogue

Home / Product Catalogue

BDA Hydraulic Setting Tool



The BDA Hydraulic Setting Tool is used to run and set all wireline set bridge plugs and packers on tubing, coil tubing or drill pipe. The BDA Hydraulic Setting Tool utilizes a ball to activate the setting sequence once surface pressure is applied. With out the drop ball in place the work string will have full communication with the annulus. The bottom connections of the BDA Hydraulic Setting Tool accept common wireline adapter kits and with its modular design extra pistons can be added to lower setting force required to set down hole equipment.

The BDA Hydraulic Setting Tool with its heavy duty design and adjustable start to set pressure feature make it ideal for setting tools in high angle deviated wells. This tool also allows circulation before the ball is dropped and the packer or bridge plug set.


Attach the packer or bridge plug using the appropriate WLAK Wireline Adapter Kit. The tubing may be allowed to fill as the assembly is lowed into the wellbore. Run the bottom hole assembly to the desired setting depth. Drop the ball from surface and allow the ball enough time to gravitate into place or slowly circulate it into place. Apply appropriate pressure needed above wellbore pressure to activate the BDA Hydraulic Setting Tool and set the packer or bridge plug. When the required shear out setting force has been reached the setting tool will automatically release.

The BDA Hydraulic Setting Tool will drain when being pulled from the wellbore.

NOTE: If the setting assembly is run in the hole with a blanking plug in place precautions must be taken. Do not attempt to fill the tubing while running in the wellbore since this may cause a premature or partial set. Low fluid level wellbores also present a problem with differences between the casing and tubing pressure causing difficulties with releasing from the tool. Please consult with your Pinnacle Oil Tools Representative for correct running procedures.


  • Heavy duty construction.
  • Modular design allows for the addition of hydraulic pistons to lower setting pressure.
  • Compatible with all industry standard wireline adapter kits.
  • Adjustable start to set pressure.
  • Ball drop design allows tubing to fill and drain.
  • HST allows circulation before packer is set.


Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search

error: Content is protected !!