PX-10W Mechanical Set, Double Grip Packer
Description
The PX-10W is the Wireline Set version of the PX-10 Double Grip Retrievable Packer. The PX-10W uses the PL On-0ff Stinger and WLAK Wireline Adapter Kit to allow it to be set on wireline or a hydraulic setting tool. This packer configuration allows for less equipment and tubing trips over conventional wireline set seal bore production packers, with the added benefit of converting the tool to a tubing set version if desired. When run with the WLAK Wireline Adapter Kit, a blanking plug can be run in place above the PX-10W in the On-Off Stinger converting the tool into a temporary bridge plug.
Operation
The PX-10W may be run in and set on the Baker Type E-4 wireline setting tool (or equivalent) or set on tubing or coiled tubing using a Pinnacle Hydraulic Setting Tool. Once set connect the tubing string to the packer using a PL On-Off Overshot and remove or relocate the blanking plug if required.
With tubing weight on the packer, apply right hand torque. Pick up the tubing string, opening the bypass valve and equalizing pressure across the packer. Continue picking up to release the elements and lock the PX-10W into the running position. The tool may now be retrieved from the well. NOTE: The PX-10W cannot be re-set once unset.
Features
• Rugged and versatile packer.
• Full bore.
• Rated to 69 MPa (10,000 psi) in most sizes.
• Holds high pressure differential from above or below.
• Dependable 3 element pack-off system.
• Can be packed off using tension or compression.
• Set and released with a quarter turn to the right.
• Field proven releasing system.
• Optional safety release feature.
• Available in a wide variety of material and elastomer configurations.
• Bypass valve is below upper slips so debris is washed from slips when the packer is unset.
• Can be converted between wireline, hydraulic or tubing set.
• Can be run with a Model PL On-Off Assembly.
• Can be left in tension, compression, or neutral.
