P-3 Single Grip, Compression Set Packer
Description
The P-3 Single Grip Compression Set Packer is used in applications where excessive bottom hole pressure or injection pressure are not expected, and sufficient tubing weight is available to keep the packer set.
The P-3 has a large internal bypass system and reliable three element system. It is available in both manual and automatic jay configurations in left or right hand set.
Operation
Run the P-3 packer to setting depth. With the last tubing movement upward, apply a quarter turn to the right at the tool (standard right hand auto jay) and lower until the packer begins taking tubing weight. This will close the bypass and pack-off the elements.
The P-3 is released by simply picking up on the tubing. This action will open the bypass, equalizing pressure across the packer and allowing the elements to relax. Continue picking up locking the packer in the running position (auto jay version) for retrieving or re-setting
Features
• Rugged, reliable design.
• Full bore.
• Dependable 3 element pack-off system.
• Compression Set.
• Straight pick up to release.
• Large internal bypass.
• Available in both manual and automatic jay configurations in left or right hand set.
• Best suited for conditions where annulus pressure is greater than the tubing pressure.
