Pump-Out Plugs
Description
The PA Pump-Out Plug Assembly is used on the bottom of a production packer or tailpipe. The assembly holds pressure from below and unseats with a pre-determined amount of tubing pressure. The PA Pump-Out Plug is easily field adjustable. The PB Pump-Out Plug Assembly is used on the bottom of a production packer or tailpipe. The assembly holds pressure from below and unseats with a pre-determined amount of tubing pressure. The PB Pump-Out Plug assembly is recommended when running into liners or highly deviated wells since the bottom insert is a bullet shape for ease of entry. The PB Pump-Out Plug is easily field adjustable. The PC Pump-Out Plug Assembly is used on the bottom of a production packer to test tubing integrity or to activate a hydraulic set packer. The PC Pump-Out Plug assembly allows fluid flow from both directions until a ball is gravitated down into the landing seat. Pressure applied to the tubing string will shear out ball and seat at a pre-determined pressure setting. The PC Pump-Out Plug is easily field adjustable.
Features
• Economical temporary plug for tubing.
• Field adjustable shear.
• Flexible designs to accommodate most any situation.
• Aluminum inserts with optional steel inserts.
• Full tubing I.D. achieved once insert is expended.
